100% PASS RATE CISCO NEW 100-150 EXAM LABS - 100-150 FREE DOWNLOAD

100% Pass Rate Cisco New 100-150 Exam Labs - 100-150 Free Download

100% Pass Rate Cisco New 100-150 Exam Labs - 100-150 Free Download

Blog Article

Tags: New 100-150 Exam Labs, Reliable 100-150 Dumps, 100-150 Reliable Exam Camp, Reliable 100-150 Exam Simulations, Sample 100-150 Test Online

We VCE4Plus are growing faster and faster owing to our high-quality latest 100-150 certification guide materials with high pass rate. Based on our past data, our pass rate of 100-150 training guide is high up to 99% to 100% recently years. Many customer will become regular customer and think of us once they have exams to clear after choosing our 100-150 Exam Guide one time. So we have no need to spend much spirits to advertise but only put most into researching and after-sale service. As long as you study with our 100-150 learning questions, you will find that it is a right choice.

Our 100-150 real exam has been on the top of the industry over 10 years with passing rate up to 98 to 100 percent. Ranking the top of the similar industry, we are known worldwide by helping tens of thousands of exam candidates around the world. To illustrate our 100-150 Study Materials better, you can have an experimental look of them by downloading our 100-150 demos freely. And you will find it is quite fast and convenient.

>> New 100-150 Exam Labs <<

Reliable Cisco 100-150 Dumps, 100-150 Reliable Exam Camp

We are a group of IT experts to provide professional study materials to people preparing Cisco certification exam. There are free demo you can download to check the accuracy of our 100-150 Braindumps. It just needs to take one or two days to practice VCE4Plus 100-150 dumps torrent and review the key points of our pass guide. Clearing exam is 100% guaranteed.

Cisco Certified Support Technician (CCST) Networking Sample Questions (Q16-Q21):

NEW QUESTION # 16
Which two statements are true about the IPv4 address of the default gateway configured on a host? (Choose 2.) Note: You will receive partial credit for each correct selection.

  • A. The same default gateway IPv4 address is configured on each host on the local network.
  • B. Hosts learn the default gateway IPv4 address through router advertisement messages.
  • C. The IPv4 address of the default gateway must be the first host address in the subnet.
  • D. The default gateway is the IPv4 address of the router interface connected to the same local network as the host.
  • E. The default gateway is the Loopback0 interface IPv4 address of the router connected to the same local network as the host.

Answer: A,D

Explanation:
*Statement B: "The same default gateway IPv4 address is configured on each host on the local network." This is true because all hosts on the same local network (subnet) use the same default gateway IP address to send packets destined for other networks.
*Statement D: "The default gateway is the IPv4 address of the router interface connected to the same local network as the host." This is true because the default gateway is the IP address of the router's interface that is directly connected to the local network.
*Statement A: "The IPv4 address of the default gateway must be the first host address in the subnet." This is not necessarily true. The default gateway can be any address within the subnet range.
*Statement C: "The default gateway is the Loopback0 interface IPv4 address of the router connected to the same local network as the host." This is not true; the default gateway is the IP address of the router's physical or logical interface connected to the local network.
*Statement E: "Hosts learn the default gateway IPv4 address through router advertisement messages." This is generally true for IPv6 with Router Advertisement (RA) messages, but not typically how IPv4 hosts learn the default gateway address.
References:
*Cisco Default Gateway Configuration: Cisco Default Gateway


NEW QUESTION # 17
You need to connect a computer's network adapter to a switch using a 1000BASE-T cable.
Which connector should you use?

  • A. Coax
  • B. RJ-11
  • C. RJ-45
  • D. OS2 LC

Answer: C

Explanation:
*1000BASE-T Cable: This refers to Gigabit Ethernet over twisted-pair cables (Cat 5e or higher).
*Connector: RJ-45 connectors are used for Ethernet cables, including those used for 1000BASE-T.
*Coax: Used for cable TV and older Ethernet standards like 10BASE2.
*RJ-11: Used for telephone connections.
*OS2 LC: Used for fiber optic connections.
References:
*Ethernet Standards and Cables: Ethernet Cable Guide


NEW QUESTION # 18
A Cisco switch is not accessible from the network. You need to view its running configuration.
Which out-of-band method can you use to access it?

  • A. Console
  • B. SNMP
  • C. SSH
  • D. Telnet

Answer: A

Explanation:
When a Cisco switch is not accessible from the network, the recommended out-of-band method to access its running configuration is through the console port. Out-of-band management involves accessing the network device through a dedicated management channel that is not part of the data network. The console port provides direct access to the switch's Command Line Interface (CLI) without using the network, which is essential when the switch cannot be accessed remotely via the network12.
Reference: =
Out-of-band (OOB) network interface configuration guidelines Out of band management configuration
If you have any more questions or need further assistance, feel free to ask!


NEW QUESTION # 19
During the data encapsulation process, which OSI layer adds a header that contains MAC addressing information and a trailer used for error checking?

  • A. Transport
  • B. Data Link
  • C. Network
  • D. Session

Answer: B

Explanation:
During the data encapsulation process, the Data Link layer of the OSI model is responsible for adding a header that contains MAC addressing information and a trailer used for error checking. The header typically includes the source and destination MAC addresses, while the trailer contains a Frame Check Sequence (FCS) which is used for error detection1.
The Data Link layer ensures that messages are delivered to the proper device on a LAN using hardware addresses and translates messages from the Network layer into bits for the Physical layer to transmit. It also controls how data is placed onto the medium and is received from the medium through the physical hardware.
Reference: =
The OSI Model - The 7 Layers of Networking Explained in Plain English
OSI Model - Network Direction
Which layer adds both header and trailer to the data?
What is OSI Model | 7 Layers Explained - GeeksforGeeks


NEW QUESTION # 20
Which command will display all the current operational settings configured on a Cisco router?

  • A. show protocols
  • B. show startup-config
  • C. show version
  • D. show running-config

Answer: D

Explanation:
The show running-config command is used on a Cisco router to display the current operational settings that are actively configured in the router's RAM. This command outputs all the configurations that are currently being executed by the router, which includes interface configurations, routing protocols, access lists, and other settings. Unlike show startup-config, which shows the saved configuration that the router will use on the next reboot, show running-config reflects the live, current configuration in use.
Reference: = The information is supported by multiple sources that detail the use of Cisco commands, particularly the show running-config command as the standard for viewing the active configuration on a Cisco device123.
show running-config: This command displays the current configuration running on the router. It includes all the operational settings and configurations applied to the router.
show protocols: This command shows the status of configured protocols on the router but not the entire configuration.
show startup-config: This command displays the configuration saved in NVRAM, which is used to initialize the router on startup, but not necessarily the current running configuration.
show version: This command provides information about the router's software version, hardware components, and uptime but does not display the running configuration.
Reference: Cisco IOS Commands: Cisco IOS Commands


NEW QUESTION # 21
......

The top features of VCE4Plus 100-150 exam questions are the availability of Cisco certification exam in three different formats, real, valid, and updated 100-150 exam questions, subject matter experts verified 100-150 Exam Questions, free demo download facility, 1 year updated 100-150 exam questions download facility, affordable price and 100 percent Cisco 100-150 exam passing money back guarantee.

Reliable 100-150 Dumps: https://www.vce4plus.com/Cisco/100-150-valid-vce-dumps.html

The latest and valid 100-150 pdf dumps in VCE4Plus, Cisco New 100-150 Exam Labs As the saying goes, knowledge has no limits, Cisco New 100-150 Exam Labs A: There is no time limit on your access to the files, So the PDF version of the 100-150 pass-king materials has less limitation, You can have a try before you decide to buy our 100-150 easy pass test.

This is designed to test the speed of the connection between the 100-150 client and the server, and then, based on the feedback, only apply certain policies that won't use up too much bandwidth.

When a digital product or service is launched, it's the start of a new understanding of how customers interact and how they feel about the product, The latest and valid 100-150 Pdf Dumps in VCE4Plus.

Get Marvelous New 100-150 Exam Labs and First-grade Reliable 100-150 Dumps

As the saying goes, knowledge has no limits, A: There is no time limit on your access to the files, So the PDF version of the 100-150 pass-king materials has less limitation.

You can have a try before you decide to buy our 100-150 easy pass test.

Report this page